16mm Dot LED Illuminated Switch Pushbutton

IB16S-P11F-D

· Momentary switch: Push & Hold,ON; Release,OFF

· The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

· Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

· With a wire connector (not included), you don't need to solder the terminals, made installing the switch pain free

· IP65, IK08 protection can be used in wet or dusty environment

· 1NO1NC

What's the Pushbutton Switch 
This is a perfect choice if you are in need of a rugged push button! These push buttons are a very tough, small, panel-mount momentary switch with an illuminated blue LED ring. It is a SPDT with 16mm threading. These buttons are rated up to 3A and 250VAC while the LED is rated for 5-12V. The higher the voltage value, the brighter the LED. You can add a wire connector, then you don't need to solder the terminals, make installing very easy. 

What's the Momentary Switch 
Momentary switch, normally open, remain in ON state as long as being pressed 

What's the Momentary Switch Used for 
Most often momentary switches are used for circuits control in electromagnetic starter, stuff like relay, Horn Button Switch, PC Power Switch or any circuit controls 

What's Note 
-These switches come with a rubber O-ring which makes them splash resistant but they can NOT be submerged in the water 

What's the Customer Support 
If you have any questions, feel free to contact us by E-mail any time.We get professional customer service staff and technician to help you 

Note: If you need Customized LED, please inform us by mail:

1. What Led Color?     2. What Led Voltage?