Mini Push Button Switch Waterproof Momentary Metal Automatic Return Button Switch (12mm)

· Metal Shell made from affordable Brass, matching plastics and Electric Parts to build the push button switch.

· Rated current and voltage: 2A/36V DC. Button head diameter about 9mm.

· Normally Open switch, without led indicator. Head protection level: IP65,IK08.

· Contact resistance: less 50mΩ. Insulation resistance: over 1000mΩ. Operating temperature: -20~+55 ℃.

· Commonly used as vehicle horns, ignition switch, doorbells, home appliances button,and car, engineering equipment project.

Description:

· A push button switch is a momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. An automatic mechanism (such as a spring) returns the switch to its default position immediately afterwards, restoring the initial circuit condition.

· This button perfect for Doorbells, Horn Button Switch, PC Power Switch, home appliances button or any circuit controls. Also great for electronic DIY projects.

Waterproof Push Button Switch

· Momentary Switch: Momentary switches are switches which only remain in their on state as long as they're being actuated (pressed, held, etc.).

· The terminals are very small, need to be very careful when soldering the wires on to them. Recommended solder within 3 seconds.

· Note:

· The Size Is Small One, Please Check the Size Map Carefully Before Purchased !

· Installation instruction and wiring diagram are not included in the package.

· Professional installation is highly recommended.